EDM 3.0
1RC Racing · Oval racer
Setup shownClear · 1RC1117
Shorter than an A4 sheet
9.8 in / 24.8 cm long1/18 scale
Oval racing
Getting started.
In the box
- 1 × 1/18 EDM 3.0 Oval Car, Clear
- 1 × 2.4Ghz Transmitter and Receiver
- 1 × Standalone ESC - Forward and Reverse with LiPo protection
- 1 × Full Ball Bearings
- 1 × 230mAh NiMh 6.0 Volt Rechargeable Battery
- 1 × Wall Charger - NOTE FOR AUSTRALIA CUSTOMERS YOU WILL NEED A PLUG ADAPTER
- 1 × 8700Kv Brushless Motor
- 1 × Micro Metal Gear Steering Servo
- 1 × Instruction Manual
- 1 × Sticker Sheet Set (Main Graphics, Number Sheet)
- 1 × Tool Set (1.5mmAllen Wrench and a Combo 3mm/4mm Nut Driver)
- 4 × AA transmitter batteries
How this rig’s radio works
Your controller sends the commands. The receiver takes them in, and the speed controller (ESC) controls power to the motor.
This version has a separate receiver and speed controller.
- Receiver
- 2.4Ghz Transmitter and Receiver
- Speed control (ESC)
- Standalone ESC - Forward and Reverse with LiPo protection
What else you need
Everything You Need Is in the Box
Replacement parts.
Find the part number for your version, then check its stock at 1RC Racing.
Details, when you need them.
Specifications
- Overall Length
- 9.76" (248mm)
- Front Track Width
- 4.65" (118mm)
- Rear Track Width
- 4.67" (118.5mm)
- Wheelbase
- 6.02" (153mm)
- Height
- 3.43" (87mm)
- Weight with Battery Installed
- ~9.8oz (278g)
- Power type
- Electric
- Completion level
- Ready-To-Run
- Vehicle type
- oval racer
- Scale
- 1/18
- Radio
- Included
- Battery
- Included
- Charger
- Included
Source & date
Product information from 1RC Racing. Checked .