Super Modified
1RC Racing · Oval racer
Setup shownRed · 1RC1150
Shorter than an A4 sheet
10 in / 25.4 cm long1/18 scale
Oval racing
Getting started.
In the box
- 1 × 1/18 Super Modified Oval Car, Red
- 1 × Full Ball Bearings
- 1 × 2.4Ghz Transmitter and Receiver
- 1 × Standalone ESC - Forward and Reverse with LiPo protection
- 1 × 230mAh NiMh 6.0 Volt Rechargeable Battery
- 1 × USB Ni-Mh Battery Charger (Note: USB Charger Block Not Included)
- 1 × 8700Kv Brushless Motor
- 1 × Micro Steering Servo
- 1 × Tool Set (1.5mm Allen Wrench and a Combo 3mm/4mm Nut Driver)
- 4 × AA transmitter batteries
- 8 × 2mm C-Clips
- 8 × 1mm C-Clips
- 1 × Instruction Manual
- 1 × Sticker Sheet Set (Main Graphics, Number Sheet)
How this rig’s radio works
Your controller sends the commands. The receiver takes them in, and the speed controller (ESC) controls power to the motor.
This version has a separate receiver and speed controller.
- Receiver
- 2.4Ghz Transmitter and Receiver
- Speed control (ESC)
- Standalone ESC - Forward and Reverse with LiPo protection
What else you need
USB Charger Block Not Included
Replacement parts.
Find the part number for your version, then check its stock at 1RC Racing.
Details, when you need them.
Specifications
- Overall Length
- 10.00" (254mm)
- Front Track Width
- 4.90" (124mm)
- Rear Track Width
- 5.06" (129mm)
- Wheelbase
- 5.60" (142mm)
- Height
- 4.50" (114mm)
- Weight with Battery Installed
- ~ 11.1oz (315g)
- Power type
- Electric
- Completion level
- Ready-To-Run
- Vehicle type
- oval racer
- Scale
- 1/18
- Radio
- Included
- Battery
- Included
- Charger
- Included
Source & date
Product information from 1RC Racing. Checked .