MINI-Z 4x4 readyset Toyota LAND CRUISER 300 GR SPORT Dark Red Mica Metallic
Kyosho · Rock crawler
Setup shownKYO32538MR
Longer than 2 payment cards
8.1 in / 20.7 cm long
Rock crawling
Getting started.
In the box
- 1 × Complete chassis with built-in electronics.
- 1 × Factory-painted body complete with many fine details
- 1 × KT-531P 2.4GHz transmitter
- 1 × Pinion gear set（10T、12T、14T、16T、18T、20T）
- 1 × 3 types of pinion gear spacers
What else you need
- 4 x AAA batteries for the transmitter
- 4 x AAA batteries for chassis （Alkaline or NiMH）
Replacement parts.
Find the part number for your version, then check its stock at Kyosho.
From Kyosho.
- Adopts full-fledged solid axle links similar to the 1/10 scale models, ensuring the driving performance and wheel travel required for crawler models.
- Equipped with a specially tuned high-torque 130 motor. Additionally, the main gear unit features a slipper clutch that protects the drive system by releasing torque when under heavy load.
- Features a high-torque servo specifically designed for crawler models, capable of supporting authentic crawling performance. The steering link optimization achieves the largest steering angle in Mini-Z history.
- Full bearing specification with a total of 18 ball bearings. Metal gears, known for their durability, are used in parts that bear heavy loads.
- The "KT-531P" transmitter uses the FHSS 2.4GHz system and features a sponge on the steering wheel to enhance operability.
More features
- Comes as a fully assembled, ready-to-run model, requiring only the insertion of batteries to begin operation.
- An optional light set (MZW429R) can be installed on the top of the circuit board. The lights respond to throttle operation, and the headlight's lighting interval can be adjusted freely—from steady lighting to blinking—via the transmitter's trim.
- Supports the separately sold gyro unit (MZW446), and like the RWD/AWD series, manual adjustments can be made via the volume control.
- Equipped with popular BS Goodrich tires.
- GR (Gazoo Racing) takes the already formidable off-road performance of this world-famous SUV up to a higher level with strengthened suspension and advanced electronic controls. The front bumper and grille are exclusive to the GR Sport model.
- The same ladder frame and multi-link rigid-axle suspension commonly used in popular 1:10-scale off-road models, is condensed into Mini-Z size for the most articulation and performance available in any mini RC truck.
- The Mini-Z 4x4 incorporates a ladder frame design with steel vertical plates, in combination with various molded parts, to deliver the ultimate balance of of rigidity and flex for superior performance and durability.
Details, when you need them.
Specifications
- Length
- 207.0mm
- Width
- 88.5mm
- Height
- 90.0mm
- Wheel Base
- 120mm
- Weight
- 242.0g (excl. battery)
- Motor/Engine
- 130 Class
- Gear Ratio
- 55.44：1/46.20：1/39.60：1/34.65：1/30.80：1/27.72：1
- Front Tire Width
- 12.0mm
- Rear Tire Width
- 12.0mm
- Battery
- 4 x AAA alkaline
- Transmitter
- Syncro KT-531P
- Speed Approx.
- 2.7km/h〜5.4km/h
- Running Time Approx.
- 60 mins
- Vehicle type
- rock crawler
- Completion level
- Ready-To-Run
- Power type
- Electric
- Motor Type
- 130 Class
- Drivetrain
- 4WD
- Radio
- Included
Source & date
Product information from Kyosho. Checked .